UV-curing Screen Ink Range, 1-Component
APPLICATION
Screen printing inks 80UV are used for decorating plastic containers made of pre-treated polyethylene (LD-PE, HD-PE) and polypropylene (PP) such as cartridges, cans, bottles, tubes, etc.
PROPERTIES
• Die• Solvent-free UV-curing screen printing inks 80UV have a very high reactivity.
• 80UV inks are delivered in a ready-to-print adjustment and show medium viscosity. They cure quickly resulting in a high-gloss finish. Prints show good adhesion and high chemical resistance.
• 80UV is formulated for fast running screen printing equipment for container printing.
• To obtain proper ink adhesion on PE and PP plastics, pre-treatment, preferably with flame, is imperative. Efficiency of pre-treatment also must be adjusted to the high printing cycles.
• 80UV inks are suitable for indoor and short-term outdoor applications.
• Conformity according to “EuPIA Suitability List of Photo-Initiators for Low Migration UV Printing Inks and Varnishes – June 2010”:
With the exception of colour 80UV/N50 black the 80UV colours listed in this product data sheet are considered to be low-migration colours according to that list. If necessary, use low-migration black 80UV/N50-LM as an alternative.
For further detailed information about this topic please refer to section “Conformity”.
• More UV ink ranges of the 80UV group for printing on PE/PP plastic containers: 81UV: Higher viscosity than 80UV. 832UV-SF: Optimized for printing on tubes, UV-LED curable, silicone-free.
>> Product Data Sheet 80UV Series
Color Shades
C-MIX SYSTEM 2000*
>> Color Card C-MIX System 2000 LL
Y 34 | Y 54 | O 54 | R 24 | R 54 | M 50 | V 50 |
B 50 | G 50 | N 50 | W 50 | E 50 | W50 | W50 |
You will find further color shades of ink series 80UV in the product data sheet.
>> Product Data Sheet 80UV Series
* The strength and tint of all colors depicted on this website may deviate from the original due to technical reasons. For an exact color display please ask for our original color cards.