Solvent Based Pad Printing Ink Range, 2-Component
APPLICATION
TP 307 inks are suitable for printing on pre-treated polyolefines, i.e. polypropylene (PP) and polyethylene (HD-PE, LD-PE) such as bottles, formed parts etc. The ink range is also appropriate for printing on chromium-plated surfaces, coated substrates and various thermoplastics such as PMMA (“acrylic glass”), ABS and duroplastics (phenolic and melamine resins, glass-fibre reinforced polyester and epoxy resins).TP 307 inks are especially used for a variety of technical-industrial applications.
PROPERTIES
• Pad inks TP 307 are solvent based pad printing inks. They are processed as 2-component ink with hardener.
• In line with current safety requirements pad printing inks TP 307 have been formulated with especially environmentally compatible raw materials. TP 307 inks do not contain aromatics, butyl glycolate (GB-Ester), cyclohexanone, Bisphenol A (BPA) and also no polycyclic aromatic hydrocarbons (PAH).
Exception: AB bronzes 75/AB to 79/AB (contain aromatics) and black colour shades N50 and 65 (PAH-containing pigments).
• If the criteria to obtain the GS mark (category 1) according to GS specification AfPS GS 2014:01 PAH have to be met, the following applies:
Colour shade black:
Only colour shades N58, 68 or 68-HD-NT are suitable.
Bronze colours:
Only MG bronzes are suitable (available upon request)
Thinner/Additives
Only those products marked with symbol in this data sheet are suitable.
• Ink range TP 307 shows good printability. The inks dry chemical-physically and result in a glossy finish.
• This ink range is especially suitable for technical/industrial applications requiring high physical and chemical resistances.
• Fully cured prints show a good scratch resistance and a highly tough surface.
• TP 307 inks exhibit good resistance against chemical cleaning agents.
• TP 307 inks are suitable for long-term outdoor applications.
• Note: Because of the variety of substrates, pre-tests are essential. It is also advised to check efficiency of possibly required pre-treatment of substrates (cleaning/degreasing, flame/corona/plasma treatment) or maybe even post-treatment (flame-drying).
>> Product Data Sheet TP 307 Series
Color Shades
C-MIX SYSTEM 2000*
>> Color Card C-MIX System 2000*
| Y 30 | Y 50 | O 50 | R 20 | R 50 | M 50 | V 50 |
 |
||||||
| B 50 | G 50 | N 50 | W 50 | E 50 | W50 |
W50 |
STANDARD 2*
| 10 citric yellow | 11 medium yellow | 15 orange | 20 light red | 21 bright red | 22 carmine red | 30 light blue |
| 32 ultra marine | 33 dark blue | 60 white | 65 black |
STANDARD HD P*
| 60-HD white | 68-HD black |
You will find further color shades of ink series TP 307 in the product data sheet.
>> Product Data Sheet TP 307 Series
* The strength and tint of all colors depicted on this website may deviate from the original due to technical reasons. For an exact color display please ask for our original color cards.